Stainless Steel 446 Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 446 Wire that is Fabricated From High Quality Raw Materials. Stainless Steel 446 Wire Available are following Specification, Grades and Size.
Stainless Steel 446 Wire

ASTM A164 Stainless Steel 446 Wire, werkstoff nr. 1.4762 / 3 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 446
UNS S44600
WERKSTOFF NR. / DIN 1.4762 / 3


Stainless Steel 446 Wire Specification :

Standard : 446 / 1.4762 / 3

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)


UNS S44600 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Ni N
446 0.2 max 1.5 max 0.75 max 0.04 max 0.03 max 23 – 30 0.50 max 0.10 – 0.25

Steel 446 Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %


Types of Satinless Steel 446 Wire :

  • Stainless Steel 446 Wire Bobbin
  • Stainless Steel 446 Wire Coil
  • Stainless Steel 446 Filler Wire
  • Stainless Steel 446 Welding Wire
  • SS 446 Wire Coil
  • SS 446 Wire Bobbin
  • AISI 446 Wire
  • SS UNS S44600 Wire
  • SS Nr. 1.4762 / 3 Wire
  • UNS S44600 Filler Wire
  • UNS S44600 Wire Bobbin
  • AISI 446 Filler Wire
  • SS 446 Wiremesh
  • AISI 446 Wire Bobbin

 

Marking & Packing
Our products like stainless steel 446 wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 446 wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.