Manufacturer, Exporter & Supplier - Stainless Steel 316 Wire, UNS S31600 Wiremesh, SS 316 Filler Wire, SS 316 Welding Wire, SS 316 Coils

Stainless Steel 316 Wire

ASTM A164 Stainless Steel 316 Wire, werkstoff nr. 1.4401 / 1.4436 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard	SS 316
UNS	S31600
WERKSTOFF NR. / DIN	1.4401 / 1.4436
AFNOR	Z7CND17-11-02
JIS	SUS 316
GOST	-
BS	316S31 / 316S33
EN	X5CrNiMo17-12-2 / X3CrNiMo17-13-3

Stainless Steel 316 Wire Specification :

Standard : 316 / 1.4401 / 1.4436

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S31600 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
316	0.08 max	2 max	0.75 max	0.045 max	0.030 max	16 – 18	2 – 3	10 – 14	0.1 max

Steel 316 Wiremesh, Wire Coil Mechanical & Physical Properties:

Density	8.0 g/cm3
Melting Point	1400 °C (2550 °F)
Tensile Strength	Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000 , MPa – 205
Elongation	35 %

Types of Stainless Steel 316 Wire :

 

Marking & Packing

Our products like stainless steel 316 wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 316 wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.