Stainless Steel 304 Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 304 Wire that is Fabricated From High Quality Raw Materials. SS 304 Wire is low carbon version. Stainless Steel 304 Wire Available are following Specification, Grades and Size.
Stainless Steel 304 Wire

ASTM A164 Stainless Steel 304 Wire, werkstoff nr. 1.4301 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 304
UNS S30400
WERKSTOFF NR. 1.4301
AFNOR Z7CN18-09
JIS SUS 304
GOST 08X18H10
BS 304S31
EN X5CrNi18-10


Stainless Steel 304 Wire Specification :

Standard : 304 / 1.4301

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)


UNS S30400 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N
304 0.08 max 2 max 0.75 max 0.040 max 0.030 max 18 – 20 - 8 – 11 -

Steel 304 Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1400 °C (2550 °F)
Tensile Strength Psi – 75000, MPa – 515
Yield Strength (0.2%Offset) Psi – 30000, MPa – 205
Elongation 35 %


Types of Satinless Steel 304 Wire :

  • Stainless Steel 304 Wire Bobbin
  • Stainless Steel 304 Wire Coil
  • Stainless Steel 304 Filler Wire
  • Stainless Steel 304 Welding Wire
  • SS 304 Wire Coil
  • SS 304 Wire Bobbin
  • AISI 304 Wire
  • SS UNS S30400 Wire
  • SS Nr. 1.4301 Wire
  • UNS S30400 Filler Wire
  • UNS S30400 Wire Bobbin
  • AISI 304 Filler Wire
  • SS 304 Wiremesh
  • AISI 304 Wire Bobbin

 

Marking & Packing
Our products like stainless steel 304 wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 304 wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.