Stainless Steel 321 Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 321 Wire that is Fabricated From High Quality Raw Materials. Stainless Steel 321 Wire Available are following Specification, Grades and Size.
Stainless Steel 321 Wire

ASTM A164 Stainless Steel 321 Wire, werkstoff nr. 1.4541 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 321
UNS S32100
WERKSTOFF NR. / DIN 1.4541


Stainless Steel 321 Wire Specification :

Standard : 321 / 1.4541

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)


UNS S32100 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N Ti
321 0.08 max 2 max 0.75 max 0.045 max 0.03 max 17 – 19 3 – 4 9 – 12 0.10 max 5xC min
0.60% max

Steel 321 Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %


Types of Satinless Steel 321 Wire :

  • Stainless Steel 321 Wire Bobbin
  • Stainless Steel 321 Wire Coil
  • Stainless Steel 321 Filler Wire
  • Stainless Steel 321 Welding Wire
  • SS 321 Wire Coil
  • SS 321 Wire Bobbin
  • AISI 321 Wire
  • SS UNS S32100 Wire
  • SS Nr. 1.4541 Wire
  • UNS S32100 Filler Wire
  • UNS S32100 Wire Bobbin
  • AISI 321 Filler Wire
  • SS 321 Wiremesh
  • AISI 321 Wire Bobbin

 

Marking & Packing
Our products like stainless steel 321 wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 321 wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.