Stainless Steel 347H Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 347H Wire that is Fabricated From High Quality Raw Materials. Stainless Steel 347H Wire Available are following Specification, Grades and Size.
Stainless Steel 347H Wire

ASTM A164 Stainless Steel 347 Wire, werkstoff nr. 1.4961 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 347H
UNS S34709
WERKSTOFF NR. / DIN 1.4961


Stainless Steel 347H Wire Specification :

Standard : 347H / 1.4550

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)


UNS S34709 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N Co + Ta
347H 0.04 - 0.10 2 max 0.75 max 0.045 max 0.03 max 17 - 19 3 - 4 9 - 13 - 8xC min
1.00 max

Steel 347H Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset) Psi - 30000 , MPa - 205
Elongation 35 %


Types of Satinless Steel 347H Wire :

  • Stainless Steel 347H Wire Bobbin
  • Stainless Steel 347H Wire Coil
  • Stainless Steel 347H Filler Wire
  • Stainless Steel 347H Welding Wire
  • SS 347H Wire Coil
  • SS 347H Wire Bobbin
  • AISI 347H Wire
  • SS UNS S34709 Wire
  • SS Nr. 1.4961 Wire
  • UNS S34709 Filler Wire
  • UNS S34709 Wire Bobbin
  • AISI 347H Filler Wire
  • SS 347H Wiremesh
  • AISI 347H Wire Bobbin

 

Marking & Packing
Our products like stainless steel 347H wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 347H wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.