Stainless Steel 317L Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 317L Wire that is Fabricated From High Quality Raw Materials. Stainless Steel 317L Wire Available are following Specification, Grades and Size.
Stainless Steel 317L Wire

ASTM A164 Stainless Steel 317L Wire, werkstoff nr. 1.4438 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 317L
UNS S31703
WERKSTOFF NR. / DIN 1.4438


Stainless Steel 317L Wire Specification :

Standard : 317L / 1.4438

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)


UNS S31703 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N
317L 0.035 max 2 max 1 max 0.040 max 0.03 max 18 - 20 3 - 4 11 - 15 -

Steel 317L Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset) Psi - 30000 , MPa - 205
Elongation 35 %


Types of Satinless Steel 317L Wire :

  • Stainless Steel 317L Wire Bobbin
  • Stainless Steel 317L Wire Coil
  • Stainless Steel 317L Filler Wire
  • Stainless Steel 317L Welding Wire
  • SS 317L Wire Coil
  • SS 317L Wire Bobbin
  • AISI 317L Wire
  • SS UNS S31703 Wire
  • SS Nr. 1.4438 Wire
  • UNS S31703 Filler Wire
  • UNS S31703 Wire Bobbin
  • AISI 317L Filler Wire
  • SS 317L Wiremesh
  • AISI 317L Wire Bobbin

 

Marking & Packing
Our products like stainless steel 317L wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 317L wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.