Stainless Steel 316L Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 316L Wire that is Fabricated From High Quality Raw Materials. SS 316L Wire has excellent forming and welding characteristics. Stainless Steel 316L Wire Available are following Specification, Grades and Size.
Stainless Steel 316L Wire

ASTM A164 Stainless Steel 316L Wire, werkstoff nr. 1.4404 / 1.4435 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 316L
UNS S31603
WERKSTOFF NR. / DIN 1.4404 / 1.4435
AFNOR Z3CND17-11-02 / Z3CND18-14-03
GOST 03Ch17N14M3 / 03Ch17N14M2
BS 316S11 / 316S13
EN X2CrNiMo17-12-2 / X2CrNiMo18-14-3

Stainless Steel 316L Wire Specification :

Standard : 316L / 1.4404 / 1.4435

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S31603 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N
316L 0.03 max 2 max 0.75 max 0.045 max 0.030 max 16 - 18 2 - 3 10 - 14 0.1 max

Steel 316L Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1400 °C (2550 °F)
Tensile Strength Psi - 75000, MPa - 515
Yield Strength (0.2%Offset) Psi - 30000, MPa - 205
Elongation 35 %

Types of Stainless Steel 316L Wire :

  • Stainless Steel 316L Wire Bobbin
  • Stainless Steel 316L Wire Coil
  • Stainless Steel 316L Filler Wire
  • Stainless Steel 316L Welding Wire
  • SS 316L Wire Coil
  • SS 316L Wire Bobbin
  • AISI 316L Wire
  • SS UNS S31603 Wire
  • SS Nr. 1.4404 Wire
  • UNS S31600 Filler Wire
  • UNS S31600 Wire Bobbin
  • AISI 316L Filler Wire
  • SS 316L Wiremesh
  • AISI 316L Wire Bobbin


Marking & Packing
Our products like stainless steel 316L wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 316L wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.