Stainless Steel 304L Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 304L Wire that is Fabricated From High Quality Raw Materials. SS 304L Wire is low carbon version. Stainless Steel 304L Wire Available are following Specification, Grades and Size.
Stainless Steel 304L Wire

ASTM A164 Stainless Steel 304L Wire, werkstoff nr. 1.4306/1.4307 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 304L
UNS S30403
WERKSTOFF NR. 1.4306/1.4307
GOST 03X18H11
BS 304S11
EN X2CrNi18-9 / X2CrNi19-11

Stainless Steel 304L Wire Specification :

Standard : 304L / 1.4306 / 1.4307

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S30403 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N
304l 0.035 max 2 max 0.75 max 0.040 max 0.030 max 18 - 20 - 8 - 13 -

Steel 304L Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1400 °C (2550 °F)
Tensile Strength Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset) Psi - 30000 , MPa - 205
Elongation 35 %

Types of Stainless Steel 304L Wire :

  • Stainless Steel 304L Wire Bobbin
  • Stainless Steel 304L Wire Coil
  • Stainless Steel 304L Filler Wire
  • Stainless Steel 304L Welding Wire
  • SS 304L Wire Coil
  • SS 304L Wire Bobbin
  • AISI 304L Wire
  • SS UNS S30403 Wire
  • SS Nr. 1.4306 Wire
  • UNS S30403 Filler Wire
  • UNS S30403 Wire Bobbin
  • AISI 304L Filler Wire
  • SS 304L Wiremesh
  • AISI 304L Wire Bobbin


Marking & Packing
Our products like stainless steel 304L wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 304L wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.