Stainless Steel 321H Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 321H Wire that is Fabricated From High Quality Raw Materials. Stainless Steel 321H Wire Available are following Specification, Grades and Size.
Stainless Steel 321H Wire

ASTM A164 Stainless Steel 321H Wire, werkstoff nr. 1.4878 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 321H
UNS S32109
WERKSTOFF NR. / DIN 1.4878


Stainless Steel 321H Wire Specification :

Standard : 321H / 1.4878

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)


UNS S32109 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N Ti
321H 0.04 - 0.10 2 max 0.75 max 0.045 max 0.03 max 17 - 19 3 - 4 9 - 12 - 4xC min
0.60% max

Steel 321H Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset) Psi - 30000 , MPa - 205
Elongation 35 %


Types of Satinless Steel 321H Wire :

  • Stainless Steel 321H Wire Bobbin
  • Stainless Steel 321H Wire Coil
  • Stainless Steel 321H Filler Wire
  • Stainless Steel 321H Welding Wire
  • SS 321H Wire Coil
  • SS 321H Wire Bobbin
  • AISI 321H Wire
  • SS UNS S32109 Wire
  • SS Nr. 1.4878 Wire
  • UNS S32109 Filler Wire
  • UNS S32109 Wire Bobbin
  • AISI 321H Filler Wire
  • SS 321H Wiremesh
  • AISI 321H Wire Bobbin

 

Marking & Packing
Our products like stainless steel 321H wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 321H wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.