Stainless Steel 310 Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 310 Wire that is Fabricated From High Quality Raw Materials. SS 310 Wire contain 25% chromium and 20% nickel, making them highly resistant to oxidation and corrosion. Stainless Steel 310 Wire is a lower carbon version.
Stainless Steel 310 Wire

ASTM A164 Stainless Steel 310 Wire, werkstoff nr. 1.4841 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 310
UNS S31000
WERKSTOFF NR. / DIN 1.4841


Stainless Steel 310 Wire Specification :

Standard : 310 / 1.4841

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)


UNS S31000 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N
310 0.25 max 2 max 1.50 max 0.045 max 0.03 max 24 – 26 - 19 – 22 -

Steel 310 Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %


Types of Satinless Steel 310 Wire :

  • Stainless Steel 310 Wire Bobbin
  • Stainless Steel 310 Wire Coil
  • Stainless Steel 310 Filler Wire
  • Stainless Steel 310 Welding Wire
  • SS 310 Wire Coil
  • SS 310 Wire Bobbin
  • AISI 310 Wire
  • SS UNS S31000 Wire
  • SS Nr. 1.4841 Wire
  • UNS S31000 Filler Wire
  • UNS S31000 Wire Bobbin
  • AISI 310 Filler Wire
  • SS 310 Wiremesh
  • AISI 310 Wire Bobbin

 

Marking & Packing
Our products like stainless steel 310 wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 310 wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.