Stainless Steel 310S Wire

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 310S Wire that is Fabricated From High Quality Raw Materials. SS 310S Wire contain 25% chromium and 20% nickel, making them highly resistant to oxidation and corrosion. Stainless Steel 310S Wire is a lower carbon version.
Stainless Steel 310S Wire

ASTM A164 Stainless Steel 310S Wire, werkstoff nr. 1.4845 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

Standard SS 310S
UNS S31008

Stainless Steel 310S Wire Specification :

Standard : 310S / 1.4845

Range : 0.10mm to 8.00mm Required Size

Designation : ASTM A164, ASME SA164

Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh

Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S31008 Wiremesh, Filler Wire & Wire Bobbin Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N
310S 0.08 max 2 max 1.50 max 0.045 max 0.03 max 24 – 26 - 19 – 22 -

Steel 310S Wiremesh, Wire Coil Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000, MPa – 515
Yield Strength (0.2%Offset) Psi – 30000, MPa – 205
Elongation 35 %

Types of Stainless Steel 310S Wire :

  • Stainless Steel 310S Wire Bobbin
  • Stainless Steel 310S Wire Coil
  • Stainless Steel 310S Filler Wire
  • Stainless Steel 310S Welding Wire
  • SS 310S Wire Coil
  • SS 310S Wire Bobbin
  • AISI 310S Wire
  • SS UNS S31008 Wire
  • SS Nr. 1.4845 Wire
  • UNS S31008 Filler Wire
  • UNS S31008 Wire Bobbin
  • AISI 310S Filler Wire
  • SS 310S Wiremesh
  • AISI 310S Wire Bobbin


Marking & Packing
Our products like stainless steel 310S wire are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 310S wire are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.