Stainless Steel 321H Sheets & Plates

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 321H Sheets and Plates that is Fabricated From High Quality Raw Materials. Our range of Stainless Steel Plates and Sheets is available in different length, width and other technical specifications.
Stainless Steel 321H Sheets & Plates

ASTM A240 Stainless Steel 321H Sheets & Plates, werkstoff nr. 1.4878 Cold Rolled Sheets & Hot Rolled Plates, Strips, Circles, Ring, Foils, Flat Suppliers.

Standard SS 321H
UNS S32109
WERKSTOFF NR. / DIN 1.4878


Stainless Steel 321H Sheets & Plates Specification :

Standard : 321H / 1.4878

Size : 1/4" to 4"

Designation : ASTM A240, ASME SA240

Finish : Cold rolled sheet (CR), 2B, 2D, BA NO(8), Hot rolled plate (HR), SATIN (Met with Plastic Coated)

Thickness: 4.0mm - 100mm

Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring(Flange)

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.


UNS S32109 Sheets & Plates Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N Ti
321H 0.04 - 0.10 2 max 0.75 max 0.045 max 0.03 max 17 - 19 3 - 4 9 - 12 - 4xC min
0.60% max

321H Sheets & Plates Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset) Psi - 30000 , MPa - 205
Elongation 35 %


Types of Satinless Steel 321H Sheets & Plates :

  • Stainless Steel 321H Sheets
  • Stainless Steel 321H Flat
  • Stainless Steel 321H Foils
  • Stainless Steel 321H Rolls
  • Stainless Steel 321H Blank
  • Stainless Steel 321H Chequered Plate
  • Stainless Steel 321H Ring
  • Stainless Steel 321H Plates
  • Stainless Steel 321H Strips
  • Stainless Steel 321H Shim Sheet
  • Stainless Steel 321H Perforated Sheet
  • Stainless Steel 321H Rectangular Profile
  • Stainless Steel 321H Rectangular Circles

 

Marking & Packing
Our products like stainless steel 321H sheets & plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 321H sheets & plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.