Manufacturer, Exporter & Supplier - Stainless Steel 317L Sheets & Plates, UNS S31703 Sheets & Plates, werkstoff nr. 1.4438 Sheets & Plates

Stainless Steel 317L Sheets & Plates

ASTM A240 Stainless Steel 317L Sheets & Plates, werkstoff nr. 1.4438 Cold Rolled Sheets & Hot Rolled Plates, Strips, Circles, Ring, Foils, Flat Suppliers.

Standard	SS 317L
UNS	S31703
WERKSTOFF NR. / DIN	1.4438

Stainless Steel 317L Sheets & Plates Specification :

Standard : 317L / 1.4438

Size : 1/4" to 4"

Designation : ASTM A240, ASME SA240

Finish : Cold rolled sheet (CR), 2B, 2D, BA NO(8), Hot rolled plate (HR), SATIN (Met with Plastic Coated)

Thickness: 4.0mm - 100mm

Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring(Flange)

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

UNS S31703 Sheets & Plates Chemical Composition:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
317L	0.035 max	2 max	1 max	0.040 max	0.03 max	18 - 20	3 - 4	11 - 15	-

317L Sheets & Plates Mechanical & Physical Properties:

Density	8.0 g/cm3
Melting Point	1454 °C (2650 °F)
Tensile Strength	Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset)	Psi - 30000 , MPa - 205
Elongation	35 %

Types of Stainless Steel 317L Sheets & Plates :

 

Marking & Packing

Our products like stainless steel 317L sheets & plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 317L sheets & plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.