Manufacturer, Exporter & Supplier - Stainless Steel 304L Sheets & Plates, UNS S30403 Sheets & Plates, werkstoff nr. 1.4307 Sheets & Plates

Stainless Steel 304L Sheets & Plates

ASTM A240 Stainless Steel 304L Sheets & Plates, werkstoff nr. 1.4306 Cold Rolled Sheets & Hot Rolled Plates, Strips, Circles, Ring, Foils, Flat Suppliers.

Standard	SS 304L
UNS	S30403
WERKSTOFF NR.	1.4306/1.4307
AFNOR	Z3CN18-10
JIS	SUS 304L
GOST	03X18H11
BS	304S11
EN	X2CrNi18-9 / X2CrNi19-11

Stainless Steel 304L Sheets & Plates Specification :

Standard : 304L / 1.4306/1.4307

Size : 1/4" to 4"

Designation : ASTM A240, ASME SA240

Finish : Cold rolled sheet (CR), 2B, 2D, BA NO(8), Hot rolled plate (HR), SATIN (Met with Plastic Coated)

Thickness: 4.0mm - 100mm

Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring(Flange)

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

UNS S30403 Sheets & Plates Chemical Composition:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
304l	0.035 max	2 max	0.75 max	0.040 max	0.030 max	18 - 20	-	8 - 13	-

304L Sheets & Plates Mechanical & Physical Properties:

Density	8.0 g/cm3
Melting Point	1400 °C (2550 °F)
Tensile Strength	Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset)	Psi - 30000 , MPa - 205
Elongation	35 %

Types of Stainless Steel 304L Sheets & Plates :

 

Marking & Packing

Our products like stainless steel 304L sheets & plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 304L sheets & plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.