Stainless Steel 310S Sheets & Plates

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 310S Sheets and Plates that is Fabricated From High Quality Raw Materials. Stainless Steel 310S Sheets and plates are widely used in moderately carburising atmospheres, as encountered in petrochemical environments. SS 310S Sheets and Plates available in Different Sizes and Thickness in India.
Stainless Steel 310S Sheets & Plates

ASTM A240 Stainless Steel 310S Sheets & Plates, werkstoff nr. 1.4845 Cold Rolled Sheets & Hot Rolled Plates, Strips, Circles, Ring, Foils, Flat Suppliers.

Standard SS 310S
UNS S31008
WERKSTOFF NR. / DIN 1.4845


Stainless Steel 310S Sheets & Plates Specification :

Standard : 310S / 1.4845

Size : 1/4" to 4"

Designation : ASTM A240, ASME SA240

Finish : Cold rolled sheet (CR), 2B, 2D, BA NO(8), Hot rolled plate (HR), SATIN (Met with Plastic Coated)

Thickness: 4.0mm - 100mm

Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring(Flange)

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.


UNS S31008 Sheets & Plates Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N
310S 0.08 max 2 max 1.50 max 0.045 max 0.03 max 24 – 26 - 19 – 22 -

310S Sheets & Plates Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %


Types of Satinless Steel 310S Sheets & Plates :

  • Stainless Steel 310S Sheets
  • Stainless Steel 310S Flat
  • Stainless Steel 310S Foils
  • Stainless Steel 310S Rolls
  • Stainless Steel 310S Blank
  • Stainless Steel 310S Chequered Plate
  • Stainless Steel 310S Ring
  • Stainless Steel 310S Plates
  • Stainless Steel 310S Strips
  • Stainless Steel 310S Shim Sheet
  • Stainless Steel 310S Perforated Sheet
  • Stainless Steel 310S Rectangular Profile
  • Stainless Steel 310S Rectangular Circles

 

Marking & Packing
Our products like stainless steel 310S sheets & plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 310S sheets & plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.