Stainless Steel 321 Sheets & Plates

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Stainless Steel 321 Sheets and Plates that is Fabricated From High Quality Raw Materials. Our range of Stainless Steel Plates and Sheets is available in different length, width and other technical specifications.
Stainless Steel 321 Sheets & Plates

ASTM A240 Stainless Steel 321 Sheets & Plates, werkstoff nr. 1.4541 Cold Rolled Sheets & Hot Rolled Plates, Strips, Circles, Ring, Foils, Flat Suppliers.

Standard SS 321
UNS S32100
WERKSTOFF NR. / DIN 1.4541


Stainless Steel 321 Sheets & Plates Specification :

Standard : 321 / 1.4541

Size : 1/4" to 4"

Designation : ASTM A240, ASME SA240

Finish : Cold rolled sheet (CR), 2B, 2D, BA NO(8), Hot rolled plate (HR), SATIN (Met with Plastic Coated)

Thickness: 4.0mm - 100mm

Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring(Flange)

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.


UNS S32100 Sheets & Plates Chemical Composition:

Grade C Mn Si P S Cr Mo Ni N Ti
321 0.08 max 2 max 0.75 max 0.045 max 0.03 max 17 – 19 3 – 4 9 – 12 0.10 max 5xC min
0.60% max

321 Sheets & Plates Mechanical & Physical Properties:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %


Types of Satinless Steel 321 Sheets & Plates :

  • Stainless Steel 321 Sheets
  • Stainless Steel 321 Flat
  • Stainless Steel 321 Foils
  • Stainless Steel 321 Rolls
  • Stainless Steel 321 Blank
  • Stainless Steel 321 Chequered Plate
  • Stainless Steel 321 Ring
  • Stainless Steel 321 Plates
  • Stainless Steel 321 Strips
  • Stainless Steel 321 Shim Sheet
  • Stainless Steel 321 Perforated Sheet
  • Stainless Steel 321 Rectangular Profile
  • Stainless Steel 321 Rectangular Circles

 

Marking & Packing
Our products like stainless steel 321 sheets & plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 321 sheets & plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.