Inconel 718 Sheets and Plates

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Inconel 718 Sheets and Plates that is Fabricated From High Quality Raw Materials. Inconel alloys are typically used in industries having high temperature applications. Inconel 718 Sheets and Plates are Available in Following Specification, Grade and Sizes.
Inconel 718 Sheets and Plates

ASTM B161 Inconel 718 Shim Sheet, DIN 2.4668 Sheets & Plates, ASTM B443 Inconel 718 Chequered Plate, Inconel 718 Coils Manufacturer in india.

Standard Inconel 718
UNS N07718
WERKSTOFF NR. 2.4668


Inconel 718 Sheet & Plates Specification :

Designation :ASTM B443, AMS 5599, AMS 5869, ISO 6208, VdTüV 499, BS 3072NA21, EN 10095, DIN 17750

Size : 15NB to 150NB In

Grades : Inconel 718 (UNS No. N07718) Sheets & Plates, 2.4668

Type : Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Form : Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.


Inconel 718 Sheet & Plates Chemical Composition:


Inconel
%
Ni
Cr
Fe
Mo
Nb
Co
C
Mn
Si
S
Cu
Al
Ti
718
Min.
50
17
balance
2.8
4.75
- - - - - -
0.2
0.7
Max.
55
21
3.3
5.5
1
0.08
0.35
0.35
0.01
0.3
0.8
1.15


UNS N07718 Butt weld Fittings Mechanical & Physical Properties :

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.2 g/cm3 1350 °C (2460 °F) Psi - 1,35,000 , MPa -930 Psi - 70,000 , MPa - 482 45 %


Types of Inconel 718 ASTM B443 Sheets and Plates :
  • Inconel 718 Sheets
  • Inconel 718 ASTM B443 Sheets
  • Inconel 718 ASTM B443 Sheets
  • Inconel 718 B443 Sheets
  • Inconel 718 Perforated Sheet
  • Inconel 718 Chequered Plate
  • Inconel 718 Shim Sheet
  • Inconel 718 Plates
  • Inconel 718 ASTM B443 Plates
  • Inconel 718 ASTM B443 Plates
  • Inconel 718 ASTM B443 Plates
  • Inconel 718 Circles
  • Inconel 718 Coils
  • Inconel 718 Strips


Marking & Packing
Our products like Inconel 718 Sheets and Plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 718 Sheets and Plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.