Manufacturer, Exporter & Supplier - Inconel 718 Welded Pipe, Inconel N07718 Seamless Tube, Inconel 718 Bend Pipes, Inconel 718 Fabricated Pipes

Inconel 718 Pipes & Tubes

ASTM B163 Inconel 718 Seamless Pipes & Tubes, DIN 2.4668 Pipes & Tubes, ASTM B725 Inconel 718 Welded Pipes & Tubes, Inconel 718 ERW Pipes Manufacturer in india.

Standard	Inconel 718
UNS	N07718
WERKSTOFF NR.	2.4668

Inconel 718 Pipes & Tubes Specification :

Designation :

Seamless Pipes & Tubes : ASTM / ASME SB 161 / B 163

Welded Pipes & Tubes : ASTM / ASME SB 725 / B730

Length : Within 13500mm

Size : 4 to 219mm W. T.: 0.5 to 20mm

Grades : Inconel 718 (UNS N07718), 2.4668

Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes

Form : Round, Square, Rectangular, Hydraulic Etc.

Product Range : Round Pipes, Square Pipes, Rectangular Pipes, Straight Inconel Tubing, Inconel 718 Capillary Tubing, Large Size Seamless Pipes, Inconel 718 Instrumentation Tubes, Seamless Cold Rolled Coiled Inconel 718 Tubing, Pre Insulated Inconel 718 Tubes, Decorative Polished Pipes, Electropolished Inconel 718 Tubes, High Pressure Inconel 718 Tubes, Seamless Heat Exchanger Tubes, Seamless U-tubes, Large Diameter Fabricated Pipes, Seamless U-Bended Heat Exchanger Tubes.

Inconel 718 Pipes & Tubes Chemical Composition:

Inconel	%	Ni	Cr	Fe	Mo	Nb	Co	C	Mn	Si	S	Cu	Al	Ti
718	Min.	50	17	balance	2.8	4.75	-	-	-	-	-	-	0.2	0.7
	Max.	55	21		3.3	5.5	1	0.08	0.35	0.35	0.01	0.3	0.8	1.15

UNS N07718 Pipes Mechanical & Physical Properties :

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.2 g/cm3	1350 °C (2460 °F)	Psi - 1,35,000 , MPa -930	Psi - 70,000 , MPa - 482	45 %

Types of Inconel 718 ASTM B163 Pipes & Tubes :

Marking & Packing

Our products like Inconel 718 pipes & tubes are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 718 pipes & tubes are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.