Manufacturer, Exporter & Supplier - Inconel 718 Flanges, Inconel N07718 Slip on Flanges, Inconel 718 Lap Joint Flanges, Inconel 718 Forged Flanges

Inconel 718 Flanges

ANSI B16.47 Inconel 718 Blind Flanges, DIN 2.4668 ASTM B564 Plate Flanges, Inconel N07718 Socket Weld Flanges & Weld Neck Flanges Manufacturer in india.

Standard	Inconel 718
UNS	N07718
WERKSTOFF NR.	2.4668

Inconel 718 ANSI B16.5 / B16.47 Flanges Specification :

Standard : ASTM, ASME, ANSI, JIS, DIN, BSNA 11, EN Ni 99.2, JIS NW 2200, GOST-НП-2

Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Designation : ASTM / ASME B 564 / SB 564

Class : Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500 & Class 2500

Size : 1/2″NB TO 60″NB

Grades : Inconel 718 (UNS N07718) Flanges, 2.4668

Pressure : DIN PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160

Inconel 718 Flanges Chemical Composition :

Inconel	%	Ni	Cr	Fe	Mo	Nb	Co	C	Mn	Si	S	Cu	Al	Ti
718	Min.	50	17	balance	2.8	4.75	-	-	-	-	-	-	0.2	0.7
	Max.	55	21		3.3	5.5	1	0.08	0.35	0.35	0.01	0.3	0.8	1.15

UNS N07718 Flanges Mechanical & Physical Properties :

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.2 g/cm3	1350 °C (2460 °F)	Psi - 1,35,000 , MPa -930	Psi - 70,000 , MPa - 482	45 %

Types of Inconel 718 ASTM B564 Flanges :

Marking & Packing

Our products like Inconel 718 flanges are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 718 flanges are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.