Inconel 718 Butt weld Fittings

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Inconel 718 Buttweld Fittings that is Fabricated From High Quality Raw Materials. We offer these Fittings as per the specification of our esteemed clients by following International standard of quality. Inconel 718 Butt weld Fittings are Available in different forms and grades.
Inconel 718 Butt weld Fittings

ANSI B16.9 Inconel 718 Butt weld Pipe Fittings, DIN 2.4668 Inconel 718 ASTM B366 Elbow, Inconel 718 Reducer, Inconel 718 Tee Manufacturer in india.

Standard Inconel 718
UNS N07718
WERKSTOFF NR. 2.4668



Inconel 718 ANSI B16.9 / B16.28 Pipe Fittings Specification :

Standard : ASME / ANSI B16.9, ASME / ANSI B16.11, ASME / ANSI B16.28, ASME B16.5, MSS SP-43, GB12459, GB/T13401, GB/T14383, SH3406, SH3408, SH3409 etc.

Designation : ASTM / ASME B 366 / SB 366

Schedule : Sch 5 TO Sch XXS.

Size : Seamless 1/2" - 10" , Welded 1/2" - 48"

Wall Thickness : from 2 to 40 mm.

Grades : Inconel 718 Buttweld Fittings(UNS No. N07718) Butt weld Fittings, 2.4668

Type : Seamless / Welded


Inconel 718 Butt weld Fittings Chemical Composition :


Inconel
%
Ni
Cr
Fe
Mo
Nb
Co
C
Mn
Si
S
Cu
Al
Ti
718
Min.
50
17
balance
2.8
4.75
- - - - - -
0.2
0.7
Max.
55
21
3.3
5.5
1
0.08
0.35
0.35
0.01
0.3
0.8
1.15


UNS N07718 Butt weld Fittings Mechanical & Physical Properties :

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.2 g/cm3 1350 °C (2460 °F) Psi - 1,35,000 , MPa -930 Psi - 70,000 , MPa - 482 45 %


Types of Inconel 718 ASTM B366 Butt weld Pipe Fittings :
  • Inconel 718 Equal Tees
  • Inconel 718 45 LR Elbows
  • Inconel 718 90 LR Elbows
  • Inconel 718 90 SR Elbows
  • Inconel 718 End Caps
  • Inconel 718 Reducing Tees
  • Inconel 718 Concentric Reducers
  • Inconel 718 Eccentric Reducers
  • Inconel 718 Equal Cross
  • Inconel 718 Stub End
  • Inconel 718 Swedge Nipple
  • Inconel 718 Long Radius Bend
  • Inconel 718 180° LR Elbow
  • Inconel 718 Reducing Nipple
  • Inconel 718 Lateral Tee
  • Inconel 718 1D Elbow


Marking & Packing
Our products like Inconel 718 butt weld pipe fittings are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 718 butt weld pipe fittings are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.