Manufacturer, Exporter & Supplier - Inconel N07718 Forged Fittings, Inconel 718 Forged Tee & Cross, Inconel 718 Union, Inconel 718 Coupling

Inconel 718 Forged Fittings

ANSI B16.11 Inconel 718 Forged Pipe Fittings, DIN 2.4668 Inconel 718 Forged Elbow, Inconel 718 Forged Tee, Inconel 718 Coupling Manufacturer in india.

Standard	Inconel 718
UNS	N07718
WERKSTOFF NR.	2.4668

Inconel 718 ANSI B16.11 Pipe Fittings Specification :

Dimensions : ASME 16.11, MSS SP-79,83,95,97,BS 3799

Designation : B 564, SB 564

Class : 3000 LBS, 6000 LBS, 9000 LBS

Size : 1/2"NB TO 4"NB IN

Range : 15 NB TO 100 NB IN 3000 LBS, 6000 LBS, 9000 LBS

Grades : Inconel 718 (UNS No. N07718), 2.4668

Type : SOCKET WELD (S/W) & SCREWED (SCRD), Threaded – NPT, BSP, BSPT

Inconel 718 Forged Fittings Chemical Composition:

Inconel	%	Ni	Cr	Fe	Mo	Nb	Co	C	Mn	Si	S	Cu	Al	Ti
718	Min.	50	17	balance	2.8	4.75	-	-	-	-	-	-	0.2	0.7
	Max.	55	21		3.3	5.5	1	0.08	0.35	0.35	0.01	0.3	0.8	1.15

UNS N07718 Mechanical & Physical Properties:

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.2 g/cm3	1350 °C (2460 °F)	Psi - 1,35,000 , MPa -930	Psi - 70,000 , MPa - 482	45 %

Types of Inconel 718 ASTM B564 Forged Socket Weld & Threaded Fittings :

Marking & Packing

Our products like Inconel 718 forged pipe fittings are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 718 forged pipe fittings are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.