Guru Gautam Steels are Manufacturers, Supplier and Exporters of Inconel 625 Sheets and Plates that is Fabricated From High Quality Raw Materials. These are made of corrosion resistant materials which are well suited for service in extreme environments. Inconel 625 Sheets and Plates are Available in Following Specification, Grade and Sizes.
ASTM B161 Inconel 625 Shim Sheet, DIN 2.4856 Sheets & Plates, ASTM B168 Inconel 625 Chequered Plate, Inconel 625 Coils Manufacturer in india.
Type : Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Form : Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Inconel 625 Sheet & Plates Chemical Composition:
Ni
Fe
C
Mn
Si
Cr2
Mo
Co
Al
Ti
Nb + Ta
P
S
58.0 min
5.0 max
0.10 max
0.50 max
0.50 max
20.0-23.0
8.0-10.0
1.0 max
0.40 max
0.40 max
3.15–4.15
0.015 max
0.015 max
UNS N06625 Butt weld Fittings Mechanical & Physical Properties :
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
8.4 g/cm3
1350 °C (2460 °F)
Psi - 1,35,000 , MPa -930
Psi - 75,000 , MPa - 517
42.5 %
Types of Inconel 625 ASTM B168 Sheets and Plates :
Inconel 625 Sheets
Inconel 625 ASTM B168 Sheets
Inconel 625 ASTM B168 Sheets
Inconel 625 B168 Sheets
Inconel 625 Perforated Sheet
Inconel 625 Chequered Plate
Inconel 625 Shim Sheet
Inconel 625 Plates
Inconel 625 ASTM B168 Plates
Inconel 625 ASTM B168 Plates
Inconel 625 ASTM B168 Plates
Inconel 625 Circles
Inconel 625 Coils
Inconel 625 Strips
Marking & Packing
Our products like Inconel 625 Sheets and Plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 625 Sheets and Plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.
Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.