Inconel 625 Round Bars & Rods

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Inconel 625 Round Bar and Rods that is Fabricated From High Quality Raw Materials. These bars are very durable and carry sturdy construction. Inconel 625 Round Bar and Rods are Available in Following Specification, Grade and Sizes.
Inconel 625 Round Bars and Rods

ASTM B466 Inconel 625 Round Bars, DIN 2.4856 Forged Bars, Inconel 625 Hex Bar, Inconel 625 Square Bars Manufacturer in india.

Standard Inconel 625
UNS N06625
WERKSTOFF NR. 2.4856
AFNOR NC22DNB4M
JIS NCF 625
GOST ХН75МБТЮ
BS NA 21
EN NiCr22Mo9Nb
OR ЭИ602


Inconel 625 Round Bars and Rods Specification :

Designation :ASTM / ASME B466, SB466

Size : 15NB to 150NB In

Grades : Inconel 625 (UNS No. N06625) Round Bars 2.4856

Length : 100 mm To 3000 mm Long & Above

Form : Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh


Inconel 625 Round Bars & Rods Chemical Composition :

Ni Fe C Mn Si Cr2 Mo Co Al Ti Nb + Ta P S
58.0 min 5.0 max 0.10 max 0.50 max 0.50 max 20.0-23.0 8.0-10.0 1.0 max 0.40 max 0.40 max 3.15–4.15 0.015 max 0.015 max


UNS N06625 Mechanical & Physical Properties:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.4 g/cm3 1350 °C (2460 °F) Psi - 1,35,000 , MPa -930 Psi - 75,000 , MPa - 517 42.5 %


Types of Inconel 625 ASTM B466 Round Bars and Rods :
  • Inconel 625 Round Bar
  • Inconel 625 ASTM B 466 Round Bar
  • Inconel 625 ASME SB 466 Round Bar
  • Inconel 625 ASTM B 466 Rods
  • Inconel 625 Industrial Bars
  • Inconel 625 Hexagon Bars
  • Inconel 625 Forged Round Bars
  • Inconel 625 Rods
  • Inconel 625 ASTM B 466 Rods
  • Inconel 625 ASME SB 466 Rods
  • Inconel 625 ASTM B 466 Round Bar
  • Inconel 625 Hex Bars
  • Inconel 625 Square Bars
  • Inconel 625 Hollow Bar


Marking & Packing
Our products like Inconel 625 Round Bars and Rods are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 625 Round Bars and Rods are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.