Manufacturer, Exporter & Supplier - Inconel 625 Welded Pipe, Inconel N06625 Seamless Tube, Inconel 625 Bend Pipes, Inconel 625 Fabricated Pipes

Inconel 625 Pipes & Tubes

ASTM B163 Inconel 625 Seamless Pipes & Tubes, DIN 2.4856 Pipes & Tubes, ASTM B725 Inconel 625 Welded Pipes & Tubes, Inconel 625 ERW Pipes Manufacturer in india.

Standard	Inconel 625
UNS	N06625
WERKSTOFF NR.	2.4856
AFNOR	NC22DNB4M
JIS	NCF 625
GOST	ХН75МБТЮ
BS	NA 21
EN	NiCr22Mo9Nb
OR	ЭИ602

Inconel 625 Pipes & Tubes Specification :

Designation :

Seamless Pipes & Tubes : ASTM / ASME SB 161 / B 163

Welded Pipes & Tubes : ASTM / ASME SB 725 / B730

Length : Within 13500mm

Size : 4 to 219mm W. T.: 0.5 to 20mm

Grades : Inconel 625 (UNS N06625) , 2.4856

Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes

Form : Round, Square, Rectangular, Hydraulic Etc.

Product Range : Round Pipes, Square Pipes, Rectangular Pipes, Straight Inconel Steel Tubing, Inconel 625 Capillary Tubing, Large Size Seamless Pipes, Inconel 625 Instrumentation Tubes, Seamless Cold Rolled Coiled Inconel 625 Tubing, Pre Insulated Inconel 625 Tubes, Decorative Polished Pipes, Electropolished Inconel 625 Tubes, High Pressure Inconel 625 Tubes, Seamless Heat Exchanger Tubes, Seamless U-tubes, Large Diameter Fabricated Pipes, Seamless U-Bended Heat Exchanger Tubes.

Inconel 625 Pipes & Tubes Chemical Composition:

Ni

Fe

C

Mn

Si

Cr2

Mo

Co

Al

Ti

Nb + Ta

P

S

58.0 min

5.0 max

0.10 max

0.50 max

0.50 max

20.0-23.0

8.0-10.0

1.0 max

0.40 max

0.40 max

3.15–4.15

0.015 max

0.015 max

UNS N06625 Pipes Mechanical & Physical Properties :

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.4 g/cm3	1350 °C (2460 °F)	Psi - 1,35,000 , MPa -930	Psi - 75,000 , MPa - 517	42.5 %

Types of Inconel 625 ASTM B163 Pipes & Tubes :

Marking & Packing

Our products like Inconel 625 pipes & tubes are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Inconel 625 pipes & tubes are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.