Monel K500 Round Bars & Rods

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Monel K500 Round Bar and Rods that is Fabricated From High Quality Raw Materials. Our material is certified to the highest industry standards. Monel K500 Round Bar and Rods are Available in Following Specification, Grade and Sizes.
Monel K500 Round Bars and Rods

ASTM B865 Monel K500 Round Bars, DIN 2.4375 Forged Bars, Monel K500 Hex Bar, Monel K500 Square Bars Manufacturer in india.

Standard Monel K500
UNS N05500
WERKSTOFF NR. 2.4375


Monel K500 Round Bars and Rods Specification :

Designation :ASTM / ASME B865, SB865

Size : 15NB to 150NB In

Grades : Monel K500 (UNS No. N05500) Round Bars 2.4375

Length : 100 mm To 3000 mm Long & Above

Form : Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh


Monel K500 Round Bars & Rods Chemical Composition

Monel K500 Ni Fe C Mn Si Cu Al Ti S
63.0 min 05 - 2 0.25 max 1.5 max 0.5 max 27.0 - 33.0 2.3 - 3.15 0.35 - 0.85 0.010 max


UNS N05500 Mechanical & Physical Properties:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi - 1,60,000 , MPa - 1100 Psi - 1,15,000 , MPa - 790 20 %


Types of Monel K500 ASTM B865 Round Bars and Rods :
  • Monel K500 Round Bar
  • Monel K500 ASTM B 865 Round Bar
  • Monel K500 ASME SB 865 Round Bar
  • Monel K500 ASTM B 865 Rods
  • Monel K500 Industrial Bars
  • Monel K500 Hexagon Bars
  • Monel K500 Forged Round Bars
  • Monel K500 Rods
  • Monel K500 ASTM B 865 Rods
  • Monel K500 ASME SB 865 Rods
  • Monel K500 ASTM B 865 Round Bar
  • Monel K500 Hex Bars
  • Monel K500 Square Bars
  • Monel K500 Hollow Bar


Marking & Packing
Our products like Monel K500 Round Bars and Rods are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Monel K500 Round Bars and Rods are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.