Monel K500 Butt weld Fittings

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Monel K500 Buttweld Fittings that is Fabricated From High Quality Raw Materials. Monel K500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Monel K500 Butt weld Fittings are Available in different forms and grades.
Monel K500 Butt weld Fittings

ANSI B16.9 Monel K500 Butt weld Pipe Fittings, DIN 2.4375 Monel K500 ASTM B366 Elbow, Monel K500 Reducer, Monel K500 Tee Manufacturer in india.

Standard Monel K500
UNS N05500
WERKSTOFF NR. 2.4375



Monel K500 ANSI B16.9 / B16.28 Pipe Fittings Specification :

Standard : ASME / ANSI B16.9, ASME / ANSI B16.11, ASME / ANSI B16.28, ASME B16.5, MSS SP-43, GB12459, GB/T13401, GB/T14383, SH3406, SH3408, SH3409 etc.

Designation : ASTM / ASME B 366 / SB 366

Schedule : Sch 5 TO Sch XXS.

Size : Seamless 1/2" - 10" , Welded 1/2" - 48"

Wall Thickness : from 2 to 40 mm.

Grades : Monel K500 Buttweld Fittings(UNS No. N05500) Butt weld Fittings, 2.4375

Type : Seamless / Welded


Monel K500 Butt weld Fittings Chemical Composition :

Monel K500 Ni Fe C Mn Si Cu Al Ti S
63.0 min 0.5 - 2 0.25 max 1.5 max 0.5 max 27.0-33.0 2.3 - 3.15 0.35 - 0.85 0.010 max


UNS N05500 Butt weld Fittings Mechanical & Physical Properties :

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi - 1,60,000 , MPa - 1100 Psi - 1,15,000 , MPa - 790 20 %


Types of Monel K500 ASTM B366 Butt weld Pipe Fittings :
  • Monel K500 Equal Tees
  • Monel K500 45 LR Elbows
  • Monel K500 90 LR Elbows
  • Monel K500 90 SR Elbows
  • Monel K500 End Caps
  • Monel K500 Reducing Tees
  • Monel K500 Concentric Reducers
  • Monel K500 Eccentric Reducers
  • Monel K500 Equal Cross
  • Monel K500 Stub End
  • Monel K500 Swedge Nipple
  • Monel K500 Long Radius Bend
  • Monel K500 180° LR Elbow
  • Monel K500 Reducing Nipple
  • Monel K500 Lateral Tee
  • Monel K500 1D Elbow


Marking & Packing
Our products like Monel K500 butt weld pipe fittings are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Monel K500 butt weld pipe fittings are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.