Manufacturer, Exporter & Supplier - Inconel UNS N08800 Plates, Incoloy 800 Sheets, Incoloy 800 Sheets & Plates, DIN 2.N08800 Chequered Plates

Incoloy 800 Sheets and Plates

ASTM B161 Incoloy 800 Shim Sheet, DIN 2.N08800 Sheets & Plates, ASTM B443 Incoloy 800 Chequered Plate, Incoloy 800 Coils Manufacturer in india.

Standard	Incoloy 800	Incoloy 800H	Incoloy 800HT
UNS	N08800	N08810	N08811
WERKSTOFF NR.	1.4876	1.4958 / 1.4876	1.4859 / 1.4876
AFNOR	Z8NC32-21	Z8NC33-21	-
JIS	NCF 800	NCF 800H	NCF 800HT
GOST	ЭИ670	ЭИ670	ЭИ670
BS	NA 15	NA 15(H)	NA 15(HT)
EN	X10NiCrAlTi32-20	X5NiCrAlTi31-20	X8NiCrAlTi32-21
OR	XH32T	XH32T	XH32T

Incoloy 800/ 800h/ 800ht Sheet & Plates Specification :

Designation :ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443 , ASTM / ASME SB 409

Size : 15NB to 150NB In

Grades : Incoloy 800 (UNS No. N08800) Sheets & Plates, 2.N08800

Type : Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Form : Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Incoloy 800 / 800H / 800HT Sheet & Plates Chemical Composition:

Incoloy	800	800H	800HT
Ni	30-35	30-35	30-35
Fe	39.5 min	39.5 min	39.5 min
Cr	19-23	19-23	19-23
Cu	0.75 max	0.75 max	0.75 max
Ti	0.15-0.60	0.15-0.60	0.25-0.60
Al	0.15-0.60	0.15-0.60	0.85-1.20
C	0.1 max	0.05-0.1	0.06-0.1
Mn	1.5 max	1.5 max	1.5 max
S	0.015 max	0.015 max	0.015 max
Si	1.0 max	1.0 max	1.0 max

UNS N08800 / N08810 / N08811 Butt weld Fittings Mechanical & Physical Properties :

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.94 g/cm3	1385 °C (2525 °F)	Psi - 75,000 , MPa -520	Psi - 30,000 , MPa - 205	30 %

Types of Incoloy 800/800h/800ht ASTM B443 Sheets and Plates :

Marking & Packing

Our products like Incoloy 800/H/HT Sheets and Plates are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Incoloy 800/H/HT Sheets and Plates are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.