Manufacturer, Exporter & Supplier - Inconel N08800 Rods, Incoloy 800 Round Bar, Incoloy 800 Black Bar, Incoloy 800 Forged Bars, Incoloy 800 Rod

Incoloy 800/ 800h/ 800ht Round Bars & Rods

ASTM B408 Incoloy 800 Round Bars, DIN 2.4876 Forged Bars, Incoloy 800 Hex Bar, Incoloy 800 Square Bars Manufacturer in india.

Standard	Incoloy 800	Incoloy 800H	Incoloy 800HT
UNS	N08800	N08810	N08811
WERKSTOFF NR.	1.4876	1.4958 / 1.4876	1.4859 / 1.4876
AFNOR	Z8NC32-21	Z8NC33-21	-
JIS	NCF 800	NCF 800H	NCF 800HT
GOST	ЭИ670	ЭИ670	ЭИ670
BS	NA 15	NA 15(H)	NA 15(HT)
EN	X10NiCrAlTi32-20	X5NiCrAlTi31-20	X8NiCrAlTi32-21
OR	XH32T	XH32T	XH32T

Incoloy 800/ 800h/ 800ht Round Bars and Rods Specification :

Designation :ASTM B 408/ ASME SB 408,

Size : 15NB to 150NB In

Grades : Incoloy 800 (UNS N08800) Round Bars 2.4876

Length : 100 mm To 3000 mm Long & Above

Form : Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh

Incoloy 800/ 800h/ 800ht Round Bars & Rods Chemical Composition :

Incoloy	800	800H	800HT
Ni	30-35	30-35	30-35
Fe	39.5 min	39.5 min	39.5 min
Cr	19-23	19-23	19-23
Cu	0.75 max	0.75 max	0.75 max
Ti	0.15-0.60	0.15-0.60	0.25-0.60
Al	0.15-0.60	0.15-0.60	0.85-1.20
C	0.1 max	0.05-0.1	0.06-0.1
Mn	1.5 max	1.5 max	1.5 max
S	0.015 max	0.015 max	0.015 max
Si	1.0 max	1.0 max	1.0 max

UNS N08800 / N08810 / N08811 Mechanical & Physical Properties:

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.94 g/cm3	1385 °C (2525 °F)	Psi - 75,000 , MPa -520	Psi - 30,000 , MPa - 205	30 %

Types of Incoloy 800/800h/800ht ASTM B408 Round Bars and Rods :

Marking & Packing

Our products like Incoloy 800/H/HT Round Bars and Rods are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Incoloy 800/H/HT Round Bars and Rods are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.