Manufacturer, Exporter & Supplier - Stainless Steel 310 Welded Pipe, SS 310 Seamless Tubes, AISI 310 U Bend Pipe, ASTM 310 ERW Pipe & Tube

Stainless Steel 310 Pipes & Tubes

ASTM A182 Stainless Steel 310 Capillary Tubing, werkstoff nr. 1.4841 Instrumentation Tubes, UNS S31000 Square Pipes & Rectangular Pipes Suppliers.

Standard	SS 310
UNS	S31000
WERKSTOFF NR. / DIN	1.4841

Stainless Steel 310 Seamless & Welded Pipes & Tubes Specification :

Standard : 310 / 1.4841

Size Range : 1/8” to 48”, Seamless Pipes up to 24”

Designation : ASTM A312, ASME SA312, ASTM A269, ASTM A213, ASTM A249, ASTM A270, ASTM A511, ASTM A554, ASTM A778, ASTM A908, ASME SA249.

Product Shapes : Round, Square, Rectangular

Thickness: 0.4mm up to 30.00 mm, Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH

Length: Standard 6-6.1 meter length, 20 Ft, Custom Cut Lengths

Types : Seamless, Welded, Cold Drawn, Structural, Hot Finished, Extruded, Annealed & Pickled

Product Range: Round Pipes, Square Pipes, Rectangular Pipes, Straight Stainless Steel Tubing, Stainless Steel Capillary Tubing, Large Size Seamless Pipes, Stainless Steel Instrumentation Tubes, Seamless Cold Rolled Coiled Stainless Steel Tubing, Pre Insulated Stainless Steel Tubes, Decorative Polished Pipes, Electropolished Stainless Steel Tubes, High Pressure Stainless Steel Tubes, Seamless Heat Exchanger Tubes, Seamless U-tubes, Large Diameter Fabricated Pipes, Seamless U-Bended Heat Exchanger Tubes.

uns S31000 Pipes & tubes Chemical Composition:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
310	0.25 max	2 max	1.50 max	0.045 max	0.03 max	24 – 26	-	19 – 22	-

310 Pipes & tubes Mechanical & Physical Properties:

Density	8.0 g/cm3
Melting Point	1454 °C (2650 °F)
Tensile Strength	Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000 , MPa – 205
Elongation	35 %

Types of Stainless Steel 310 Pipes & Tubes :

 

Marking & Packing

Our products like stainless steel 310 Pipes & Tubes are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All stainless steel 310 Pipes & Tubes are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.