Hastelloy B2 Round Bars & Rods

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Hastelloy B2 Round Bar and Rods that is Fabricated From High Quality Raw Materials. Hastelloy B2 Round Bar and Rods are Available in Following Specification, Grade and Sizes. These are accessed at a cost effective price. Committed to provide customers maximum satisfaction, we offer these bars in varied sizes and finishes.
Hastelloy B2 Round Bars and Rods

ASTM B335 Hastelloy B2 Round Bars, DIN 2.4617 Forged Bars, Hastelloy B2 Hex Bar, Hastelloy B2 Square Bars Manufacturer in india.

Standard Hastelloy B2
UNS N10665
WERKSTOFF NR. 2.4617


Hastelloy B2 Round Bars and Rods Specification :

Designation :ASTM B335 / ASME SB335

Size : 15NB to 150NB In

Grades : Hastelloy B2 (UNS N10665) Round Bars 2.4617

Length : 100 mm To 3000 mm Long & Above

Form : Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh


Hastelloy B2 Round Bars & Rods Chemical Composition :

Ni Fe C Mn Si Co Cr Mo S P
Bal 2.0 max 0.02 max 1.0 max 0.1 max 1.0 max 1.0 max 26 - 30 0.03 max 0.04 max


UNS N10665 Round Bars Mechanical & Physical Properties:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi -1,10,000, MPa -760 Psi - 51,000, MPa - 350 40 %


Types of Hastelloy B2 ASTM B335 Round Bars and Rods :
  • Hastelloy B2 Round Bar
  • Hastelloy B2 ASTM B 335 Round Bar
  • Hastelloy B2 ASME SB 335 Round Bar
  • Hastelloy B2 ASTM B 335 Rods
  • Hastelloy B2 Industrial Bars
  • Hastelloy B2 Hexagon Bars
  • Hastelloy B2 Forged Round Bars
  • Hastelloy B2 Rods
  • Hastelloy B2 ASTM B 335 Rods
  • Hastelloy B2 ASME SB 335 Rods
  • Hastelloy B2 ASTM B 335 Round Bar
  • Hastelloy B2 Hex Bars
  • Hastelloy B2 Square Bars
  • Hastelloy B2 Hollow Bar


Marking & Packing
Our products like Hastelloy B2 Round Bars and Rods are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Hastelloy B2 Round Bars and Rods are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.