904L Round Bars & Rods

Guru Gautam Steels are Manufacturers, Supplier and Exporters of 904L Round Bar and Rods that is Fabricated From High Quality Raw Materials. 904L Round Bar and Rods are Available in Following Specification, Grade and Sizes. Our 904L Round Bar available at various different lengths promise to satisfy each and every one of your needs.
904L Round Bars and Rods

ASTM B649 904L Round Bars, DIN 2.4539 Forged Bars, 904L Hex Bar, 904L Square Bars Manufacturer in india.

Standard 904L
UNS N08904
WERKSTOFF NR. 2.4539
EN X1NiCrMoCu25-20-5
AFNOR Z2 NCDU 25-20
BS 904S13
JIS SUS 890L
KS STS 317J5L


904L Round Bars and Rods Specification :

Designation :ASTM B649 / ASME SB649

Size : 15NB to 150NB In

Grades : 904L (UNS N08904) Round Bars 2.4539

Length : 100 mm To 3000 mm Long & Above

Form : Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh


904L Round Bars & Rods Chemical Composition :

Ni C Mn Si Cu Cr Mo S P
23 - 28 0.02 max 2.0 max 1.0 max 1 - 2 19 - 23 4 - 5 0.035 max 0.045 max


UNS N08904 Round Bars Mechanical & Physical Properties:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.05 g/cm3 1350 °C (2460 °F) Psi -71,000, MPa -490 Psi - 32,000, MPa - 220 35 %


Types of 904L ASTM B649 Round Bars and Rods :
  • 904L Round Bar
  • 904L ASTM B649 Round Bar
  • 904L ASME SB649 Round Bar
  • 904L ASTM B649 Rods
  • 904L Industrial Bars
  • 904L Hexagon Bars
  • 904L Forged Round Bars
  • 904L Rods
  • 904L ASTM B649 Rods
  • 904L ASME SB649 Rods
  • 904L ASTM B649 Round Bar
  • 904L Hex Bars
  • 904L Square Bars
  • 904L Hollow Bar


Marking & Packing
Our products like 904L Round Bars and Rods are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All 904L Round Bars and Rods are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.