AISI 4340 (DIN-1.6582) (IS-34CrNiMo6) Round Bars & Rods

Guru Gautam Steels are Manufacturers, Supplier and Exporters of AISI 4340 (DIN-1.6582) (IS-34CrNiMo6) that is Fabricated From High Quality Raw Materials. These 4340 steel offers toughness and high strength in the heat treated condition, with good fatigue strength. These are widely used in the oil and gas industry. These are Available in Following Specification, Grade and Sizes.
Alloy Steel 4340 Round Bars

Alloy Steel DIN-1.6582 Round Bars, Alloy Steel AISI 4340 Rods, Alloy AISI 4130 Forged Bars, IS-34CrNiMo6 Hot Rolled Round Bars in India.


AISI 4340 Alloy Steel Round Bars & Rods Specification :

Standard : AISI 4340/ DIN 1.6582

Diameter 20mm - 400mm

Thickness : 1mm to 3500mm

Length : 2000mm - 5800mm

Bar Finishing : Bright, Polish & Black

Form : Round Bar, Square Bar, Hex Bar (A/F), Bush Bar, Rectangle Bar, Flat Bar, Wire Mesh


DIN-1.6582 Alloy Round Bars Chemical composition:

C % Mn % Si % Ni % Cr % Mo % P % S %
0.38-0.43% 0.60-0.80% 0.15-0.35% 1.65-2.00% 0.70-0.90% 0.20-0.30% 0.025% max 0.025% max


IS-34CrNiMo6 Alloy Round Bars Mechanical Properties:

Tensile
KSI
0.2%Proof Stress
KSI 
Elongation
%
Reduction
of Area %
Hardness
HRc
Hardness
Brinell
100 Min 80 Min 20 40 18 Min 217 Min
130 Max 110 Max - - 22 Max 235 Max


Types of DIN-1.7225 / IS-34CrNiMo6 Alloy Steel Round Bars & Rods:

  • AISI 4340 Alloy Steel Round Bar
  • AISI 4340 Bars
  • IS-34CrNiMo6 Round Bar
  • AISI 4340 Rods
  • AISI 4340 Round Bars
  • DIN 1.6582 Forged Bar
  • DIN 1.6582 Hex Bars
  • AISI 4340 Flat Bars
  • AISI 4340 Alloy Steel Rods
  • AISI 4340 Round Bar
  • DIN 1.6582 Round Bar
  • Alloy DIN 1.6582 Round Bars
  • Alloy IS-34CrNiMo6 Round Bar
  • AISI 4340 Polished Bars
  • AISI 4340 Bright Bars
  • Alloy AISI 4340 Rolled Black Bars

Related Products :

Alloy Steel Round Bars - AISI 1045

Marking & Packing
Our products like alloy steel AISI 4340 round bars & rods are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All alloy steel AISI 4340 round bars & rods are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.