Incoloy 825 Round Bars & Rods

Guru Gautam Steels are Manufacturers, Supplier and Exporters of Incoloy 825 Round Bar and Rods that is Fabricated From High Quality Raw Materials. Incoloy 825 Round Bar and Rods are Available in Following Specification, Grade and Sizes. We offer these at competitive prices.
Incoloy 825 Round Bars and Rods

ASTM B425 Incoloy 825 Round Bars, DIN 2.4858 Forged Bars, Incoloy 825 Hex Bar, Incoloy 825 Square Bars Manufacturer in india.

Standard Incoloy 825
UNS N08825
WERKSTOFF NR. 2.4858
AFNOR NFE30C20DUM
JIS NCF 825
GOST ЭП703
BS NA 16
EN NiCr21Mo
OR XH38BT


Incoloy 825 Round Bars and Rods Specification :

Designation :ASTM B425 / ASME SB425

Size : 15NB to 150NB In

Grades : Incoloy 825 (UNS N08825) Round Bars 2.4858

Length : 100 mm To 3000 mm Long & Above

Form : Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh


Incoloy 825 Round Bars & Rods Chemical Composition :

Ni Fe C Mn Si Mb Cu Cr Al Ti S
38.0 – 46.0 22.0 min 0.05 max 1.0 max 0.5 max 2.5 - 3.5 1.5 - 3.0 19.5 - 23.5 0.2 max 0.6 - 1.2 0.015 max


UNS N08825 Round Bars Mechanical & Physical Properties:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1400 °C (2550 °F) Psi - 80,000 , MPa -550 Psi - 32,000 , MPa - 220 30 %


Types of Incoloy 825 ASTM B425 Round Bars and Rods :
  • Incoloy 825 Round Bar
  • Incoloy 825 ASTM B 425 Round Bar
  • Incoloy 825 ASME SB 425 Round Bar
  • Incoloy 825 ASTM B 425 Rods
  • Incoloy 825 Industrial Bars
  • Incoloy 825 Hexagon Bars
  • Incoloy 825 Forged Round Bars
  • Incoloy 825 Rods
  • Incoloy 825 ASTM B 425 Rods
  • Incoloy 825 ASME SB 425 Rods
  • Incoloy 825 ASTM B 425 Round Bar
  • Incoloy 825 Hex Bars
  • Incoloy 825 Square Bars
  • Incoloy 825 Hollow Bar


Marking & Packing
Our products like Incoloy 825 Round Bars and Rods are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All Incoloy 825 Round Bars and Rods are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

Test Certificates
Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.